Engineers to the Aerospace Industry
04 September 2010|
APEL's new Citizen A32 |
|
| APEL's new Citizen A32 series VII. Installed and commissioned February 2009. |
|
|
|
| Technical Data | A32-VII |
| Axes | |
| Number of axes | 7 |
| Main spindle | |
| Max. turning diameter [mm] | 32 |
| Max. turning length [mm] (in one chucking) | 320mm |
| Main spindle max. speed [rpm] | 8,000 |
| Main Spindle Drive Rating [kW] | 5.5 |
| No. of turning tools | 6 |
| Number of tools for front-end machining | 4 |
| C-Axis [°] | 0.001 |
| Sub-spindle | |
| Max. workpiece diameter [mm] | 32 |
| Max. workpiece length [mm] | 150 |
| Drive rating [kW] | 2.2 |
| Max. Spindle Speed [rpm] | 8,000 |
| Number of tools for back-end machining | 9 |
| C-Axis [°] | 0.001 |
| Driven Tools | |
| Driven Tools (transverse) | 4 |
| Driven Tool Motor Power [kW] | 1.0 |
| Driven Tool Max. Speed [rpm] | 5,000 |
| Other Information | |
| Axis rapid Traverse [m/min] | 45 (X1 axis=32) |
| Space Requirement [mm] | 2527x1230 |
| Weight [kg] | 2800 |
| APEL achieves Nadcap accreditation. |
|
|
In recognition of the successful completion of the PRI evaluation process, accreditation is granted to APEL Ltd. to perform the following: AC7114 Rev B - Nadcap NonDestructive Testing (NDT) Suppliers Accreditation Program Audit Criteria
AC7114 S Rev C- S- supplemental Audit Criteria for Nadcap NonDestructive (NDT) Suppliers Accreditation Program Audit Criteria (to be used on or AFTER 23-Jun-08)
AC7114/1 Rev B - Nadcap Audit Criteria for NonDestructive Testing Facilitv Penetrant survey
AC7114/1S Rev C- Supplemental Audit Criteria for madcap Audit Criterla for NonDestructive Testing Facility Penetrant survey (to be used on or AFTER 23-Jun-08)
AC7114/2 Rev B - Nadcap Audit Criteria for NonDestructive Testing Magnetic Particle Survey
AC7114QS Rev C- Supplemental Audit Criteria for Nadcap Audit Criteria for NonDestructive Testing Magnetic Particle Survey (to be used on or AFTER 23-Jun-08)
 Click here to see the certificate
APEL's Citizen L20. |
|
| APEL's Citizen L20 series VIII type 7 sliding head lathe. Installed and commissioned March 2007. |
|
|
Technical data
| Cincom L20-VIII | |
| Main spindle | Cincom L20 |
| Maximum bar diameter [mm] | 20 |
| Max. turning length without re-chucking [mm] | 200 (600)* |
| Through-hole diameter [mm] | 24 |
| Speed [min-1] | 200 - 10.000 |
| Indexing [°] | C-axis (1) |
| Drive [kW] | 2,2 / 3,7 |
| Sub-spindle | |
| Maximum bar diameter [mm] | 20 |
| Maximum length inside collet [mm] | 80 |
| Speed [min-1] | 200 - 8.000 |
| Indexing [°] | 1 (C-axis)* |
| Drive [kW] | 0,75 / 1,5 |
| Power driven tools on vertical holder | |
| Total speed [min-1] | 200 - 4.500 |
| Drive (AC servo motor) [kW] | 1 |
| Number (gang tool and angular holder) | 6 (7 / 10)* |
| Tool system | |
| Turning tools (12x12x130) | 6 |
| Front machining (drilling) | 3 (2 driven)* |
| Back machining (drilling) | 3 (2 driven)* |
| Collets/Guide bush | |
| Collets main/sub-spindle | 145E |
| Guide bush (Neukomm) | 22.001 |
| Drill sleeves | ER16 (ER11)* |
| Rapid feed rate | |
| All axes [m /min] | 32 |
| Machine dimensions | |
| Dimensions (without bar feeder) LxWxH [mm] | 2.430 x 1.085 x 1.770 |
| Centre height [mm] | 1.050 |
| Weight [kg] | 2.150 |
| Input power capacity [kVA] | 6 |